SW-STAIR-4

Features:

The “SW-4-Stair” 24V DC control system has been designed to operate 1 zone, this is factory set.

Included with the Controller: 1 Remote, 2 PIR Sensors, 1 Light Sensor and 1 Controller

There is a 5 stage switch mounted on the side of the controller to adjust the switching time between zones between 100 milliseconds to 500 milliseconds.

Two PIR sensors are supplied for the top and the bottom of the stairs to activate the system. The lights will start from the end that the PIR is activated. They will stay on for 60 seconds once activated then switch off.

The light sensor is used so the lights will only operate below a certain lux level.

The remote control enables the operator to switch from having the lights “Automatic” to being “All on”. When in “All on mode” the PIR sensors are deactivated. If the power is turned off in “All on” mode the controller will return back to “Automatic” mode when the power is turned on again.
Button labelled “A’ switch back to “Automatic” mode, button “B” to all on mode.