Chasing LED Ribbon Strip turns on from the start of the run one segment at a time towards the end of the run.
Turns off starting from the end of the run one segment at a time towards the beginning of the run.
Momentary switch activated.
When using multiple controllers a time delay can be set so each controller triggers one after the other.
Adjustable time delays, direction, modes, speed and brightness.
Must be used with RS-CHAS receiver.
Voltage: 24 Volt DC, Constant Voltage
Wattage: 10 Watts per metre
IP Rating: IP65
LEDs per metre: 120
Cut Increments: 125mm
Maximum Length: 6.5m
Warranty: 3 Years