RS-CHAS-CON

Chasing Strip Controller

Chasing LED Ribbon Strip turns on from the start of the run one segment at a time towards the end of the run.
Turns off starting from the end of the run one segment at a time towards the beginning of the run.

 

Momentary switch activated.

When using multiple controllers a time delay can be set so each controller triggers one after the other.

 

Adjustable time delays, direction, modes, speed and brightness.

Must be used with RS-CHAS LED strip.

 

Voltage:                              24 Volt DC, Constant Voltage


Maximum Loading:     300 Watts


IP Rating:                          IP20


Warranty:                        3 Years

 


Spec Sheet

Download Spec Sheet or Instructions